Low surface temperatureIntegrated thermostatQuick mounting due to clip fixingDouble insulated(plastic)Wide voltage range Small siz
Low surface temperature
Quick mounting due to clip fixing
Wide voltage range
Touch-safe heater for the use in enclosures with electrical/ electronic components.
The design of the heater supports the natural convection which results in a high air-current of warm air.
The surface temperatures on the accessible side surfaces of he housing are kept down as a result of the heater design.
This model with plug-in thermostat does not require additional wiring.
The heaters are designed for perm-anent operation.
This heater is also available in a version without thermostat (CS 060).
|Operating voltage||120-240V AC/DC* (min. 110V, max. 265V)|
|Heating capacity||See table|
|Heater element||PTC resistor-temperature limiting|
|Surface temperature||<80 °C(176 °F),except upper protective grille|
|Connection||4-pole terminal 2.5mm2, torque 0.8Nm max.|
|Casing||Plastic according to UL94-V-0, black|
|Mounting||Clip for 35mm DIN rail, EN 50022|
|Operating/Storage temperature||-20 to +70 °C (-4 to +158 °F) / -45 to +70 °C (-49 to +158 °F)|
|Protection type/Protection class||IP20 / II (double insulated)|
|Accessories||VDE+UL File No.E15057 (according to UL499 in combination with UL508A)|
|Note||Other voltages on request|
Operating with voltages below 140V AC/DC reduces heating performance by approx.10%